baseball glove : BREAKING IN YOUR GLOVE

Once you've chosen your glove, if it is not a "pre-broken" model, you will have to break it in. A good glove is like a good friend— it takes a while to develop a good relationship. But with gloves and friends alike, the time and effort will be well rewarded.

Most gloves are designed with built-in hinges which allow the glove to be opened and closed easily. The most common hinge is located at the base of the little finger pad, about 3/4"–1 1/2" away from the heel pad. Normally, there is no pad in the hinge area; this allows the glove to open and close with minor resistance. The glove should close just like your hand at rest with the fingers folding at their hinge where they join to the palm.

Some players prefer to break a glove so that the little finger and thumb tips come together. There are a few glove models designed to accomodate this break. These gloves usually have a series of vertical laces securing the heel pad. These laces allow the glove to fold across the heel. It is possible to break down the thick heel pad on the former glove type, but it is preferrable to buy a glove designed to break to your specs than to try to modify the break angle.

I always clamp my jaw and shudder when a player tells me of the best way to break-in a glove. I have heard the most bizzare methods imaginable. Well, maybe not, but I have heard a lot of weird ones, and I've seen and repaired the results of many of these "best-ways." (Please do not send me your method.) I've relaced many gloves in my shop that have had bacon-crisp laces as a result of being oiled and put in the oven. This is how food is cooked—not how to treat leather designed and manufactured to function as a tool! I've seen gloves that have been saturated in a bucket of used motor oil. This will make the leather more pliable, and heavy, and floppy and pretty much useless. There are gloves that have been coated with linseed oil. Linseed oil is made for use on rigid items, such as wood, to seal the surface and protect against moisture. When used on leather it seals the surface and causes it to become brittle and crack.

Not all oils are created equal. Just because the label indicates oil, does not mean it is good for use on leather. Olive oil and other cooking oils will go rancid on the shelf as well as in your glove. Gloves that have had these oils used on them tend to have mushy leather. The laces break easily. The leather stretches and tears easily.

Soaking is a popular method used for breaking-in a glove. Whether the soaking is done in water or oil, the leather, laces, and pad are subject to damage. There is a constant quest to develop ways to break-in gloves instantly. Many of these procedures involve the use of household appliances, such as conventional ovens, microwave ovens, washers, dryers and hair dryers, none of which should have anything to do with leather ball gloves.

I read an article in a major sports magazine that quoted a professional ball player, who described pouring hot coffee with cream into the pocket of his glove. I don't remember if he used sugar, too, but why not?

One other thing. Some players think that pummeling a new glove is the way to a quick break. Yes, it is. It is basically the same as using the glove for many games, only much rougher. I believe the glove will be better served, and will serve better, if this extra abuse is avoided. If you just catch balls to form the glove, you are training the glove and getting your timing down at the same time. Better for you. Better for the glove.

When I break-in a glove, or mitt, I use a product that I've developed after years of trying almost every leather conditioning product on the market and some that weren't. Glove Stuff® is a cleaner and conditioner that contains lanolin, to soften and moisturize the leather so that spitting in your glove—a disgusting practice, and damaging to the leather—is unnecessary. Glove Stuff® loosens even caked on dirt and grime, which can then be wiped off with a soft towel. It will not leave your glove greasy or oily. It does not attract dirt. Glove Stuff® will not make your glove heavy or floppy. It will not promote cracking or deterioration of the leather. Buy a lot. Give it as gifts!

I apply a small amount of Glove Stuff® in the triangular area shown. I rub it into the leather until most of it has been absorbed, then wipe off the excess with a soft towel. Next, I fold the glove at the hinge and excercise that area until I feel it relax a bit. I then fold the glove and squeeze the fold with my hand so that a crease can be formed along the triangle line from the index finger side to the hinge. After setting this crease, I re-fold the glove and form a similar crease from the thumb side of the triangle to the hinge. The final step is to re-fold the glove so a crease can be formed from the center of the web crotch to the hinge. When finished with these steps you should be able to see three distinct creases fanning out from the hinge to the web crotch. After completing these steps (about 20 minutes) put the glove on your hand and close it a few times. You should be able to feel a difference in the way the glove responds. The more you repeat these excercises, the more responsive your glove will be. I may reapply some Glove Stuff® in a few days, but it is not necessary to use it in excess. I do not apply it to any other areas on a new glove. New leather should be clean and moist from the factory.

Now I did have one customer who told me his best method for break-in and, after preparing myself for the worst, was delighted to find it made excellent sense. It's fast, too. He conditions a new glove then goes to the batting cages (at an off-peak hour, please, there will be fewer distractions and less chance of injury). He buys a bucket o' balls to catch, not to bat. He says that after one session the glove is game ready. Makes sense to me. Try it.

Copyright © 2000–2004 The Sandalady.